Brand: Monsher
Product Code: MF02B
Product Name: Flexible Dropper (UL & FM) - Braided with Supports

Description
The Monsher flexible dropper is an easy-to-install sprinkler drop assembly comprising of a branch line adapter nipple, a non - corrosive stainless steel flexible hose with nuts on each end, a sprinkler reducer that connects to a sprinkler head, and a ceiling bracket assembly that securely holds the sprinkler drop system to the ceiling grid.

The Monsher flexible drop is easy-to-install, and saves installation time and labour cost without any pipe threading, measuring and cutting, thus preventing any installation mistakes once proper installation instructions are followed. This system can be easily charged with water and tested before the ceiling grid is installed. The flexible sprinkler drops come with a fully assembled system of flexible sprinkler drops that connect from branch line to sprinkler head.

You can increase installation efficiency by reducing labour cost and installation time. The rete of installation is two to three times faster than traditional fitting methods of installing sprinkler drops. you can increase your efficiency by eliminating the traditional methods of installing sprinkler drops thanks to no measuring and cutting. You don't need to use the traditional methods of installing sprinkler system if an installer needs to adjust the level and alignment of sprinkler system and location. The system is simply bent and manoeuvred around ducts and trays in congested spaces.

There is no need of heavy or special equipment to install the flexible sprinkler drops. Thus, it saves the cost associated with installation by eliminating pipe wastage since the waste comes from measuring, threading and cutting of pipes. We use corrosion-resistant materials like stainless steel (304 grade)

Technical Data:
Outlet: 1/2" or 3/4"
Hose Type: Braided
Max. Ambient Temperature Rating: 225
Max. Working Pressure Rating: 175 psig
Hose: Stainless Steel 304
Nut & Nipple: Zinc-Plated Steel
Sealing Gasket / Isolation Ring: Silicone Rubber
Minimum Bend Radius: 190mm (UL/ULC) and 10"(FM) from Connection nuts
Connection:
Inlet: 1"NPT or BSP
Outlet: 1/2" or 3/4"NPT or BSP
Assembly Length, ft (mm): 700mm
Max No. of 90 Degree Bends: 1
Max No. of 90 Degree Bends 1 in. ft: 32.0(FM)